Beranda > Artikel
4 Things To Make It Fast Lightweight Steel Rusting
The development of construction technology currently allows a person using a variety of building materials to build a house, one of which is the use of mild steel for the roof of the house. Although in the category of lightweight roof truss, roof truss of this type proved to have pretty good endurance, not easily broken and anti-rust. Although coated with anti-rust agent, it does not mean mild steel free of corrosion or rusting process. There are at least four things that can lead to corrosion on mild steel.
1. Scratched working tools
Avoid mild steel etched tool work tool. In the scratch will eliminate the protective anti-rust coating on the mild steel. The oxidation process between oxygen and chemicals from steel that will rust. When the damage occurred as a result of the former open connections or the wrong cut should quickly do relining mild steel using anti-rust paint.
2. The acid solution
An acidic solution which generally is often found in solvents and paint remover can easily eliminate the anti-rust coating on mild steel. Liquids or acidic solution are highly reactive when in contact with the surface of mild steel. If that happens then coating or coating against corrosion on mild steel will flake and instantly able to cause rust.
3. The rain and heat
Basically, mild steel exterior is not material and were not created to withstand the rain and heat massively. Exposure to weather such as rain and heat on a large scale and continuously erode its anti-rust coating. If you've bought a mild steel but will not be used in the near future, you should keep it in a room protected from exposure to the weather. For prevention, mild steel should be placed in an enclosed space that is protected from the sun and rain, and do not do the installation of lightweight steel during the rainy season.
4. Air cement
Water cement mixture sticking to the surface of mild steel long will harden and cause a chemical reaction that is potentially damaging anti-rust coating on the mild steel. It will quickly occur in the surface layer of mild steel manifold antikaratnya zinc (galvanized). When the construction phase progresses, things that should be done is to protect mild steel from the concrete or mortar. Avoid application of grout to carpus or nok tile directly over mild steel frame and make impermeable layer as a barrier to it.
Bahasa Indonesia 
Inggris
