Beranda > Artikel
How to Calculate the slope of the roof with Easy
Roof of the house is one part of the building houses which have an important role. The house roof act as protective everything underneath it from the pouring rain and the heat of the sun. In building a house roof, there are some important things that must be considered. One of them is the slope of the roof of the house. To find out more details about the ideal slope for a roof of a house, the following info:
The slope of the roof ideally 25-30 degrees
The slope of the roof of the house most ideal is about 25 degrees to 30 degrees. With the level of this inclination, homeowners can use the roof frame as lightweight steel roof truss or roof truss made of wood. Try to compare if you use the slope level is too flat or too steep. You will need a roofing material that is so much more. As a result, you will spend a lot of budget to buy material.
Level slope roofs in the form of a tile roof
For roof tiles, roof slope The ideal level is about 30 degrees or more sloping back as 35 degrees. If the sloping tile roof more than 35 degrees, you as a homeowner will need to build additional roof underneath.
Level slope of the roof in the form of concrete cast concrete roof
Well, for a type of roof on this one, do not need to be made oblique alias level slope of 0 degrees. If the concrete cast concrete roof sloped to avoid this type of leakage in the roof, the roof needs to be coated leak / waterproofing so that water can not penetrate into the house.
Level slope of the roof in the form of zinc or asbestos
For this type of asbestos or zinc roofs, you can install more gentle than a tile roof. Minimum slope angle of 10 degrees. Roof asbestos or zinc usually has a size of roof is wider and has a connection which is good so that the roof is not prone to leaking though fitted with corner ramps.
Other roof types
What about the other roof types? Slope for other roof types can be adapted to the type of materials / roofing material and design conditions houses to be built. Now this is pretty much the roof material supplied by the producers of building materials.
How do I calculate the slope of the roof of the house?
First, prepare the cardboard or preferably by using plywood. Attach a thread at the corner of the paper by using nails or needles then in a corner was by installing a ballast. Navigate the edge of the cardboard that line up with the roof of the house. If the roof is built, plug or line as the highest point of the roof. Make sure the sheets of paper upright in order to be more precise calculations.
When calculating sure the thread is not swinging. Yarn will indicate the direction of gravity. Then hold the thread with the position and mark with the symbol X. Make the angle A is the angle made when the thread is pulled. Draw a line perpendicular to the angle X and the angle A, it will create a new corner with the sign C. Between the corner of A and C will form an angle B with a 30-degree angle. Triangle ABC is a gauge of the roof slope. The greater the angle ABC atapanya more accurate calculation of the slope. That's how to calculate the slope of the roof of the house is pretty easy. You can try it out without having to go up to the roof of your house.
If you are still having difficulty in calculating the slope of the roof of the house, you can contact us at 021-5565 8080 or email us at sales@tma.co.id Good luck!
Bahasa Indonesia 
Inggris
