Beranda > Artikel
3 Tips for Installing Sand Metal Tiles
Sand metal tile is a great choice for modern buildings. In addition to its colorful appearance, its strength and durability are also good. Unfortunately, this metal roof makes a lot of noise when it rains. To solve this problem, let's discuss some installation tips that can reduce the noise of metal roofing. Here is the discussion:
Use insulation on the roof of the house
Installing insulation is the most common recommendation. This insulation is in the form of a cushion that helps reflect sound or dampen it. Insulation that can be used for roofs, for example, aluminum foil, polyester, bubble foil, glass wood and Styrofoam panels. To install a sand metal tile with this insulation, you can simply place a pad on the top of the plasterboard of the house. For reflective materials such as aluminum foil, the installation is exactly under the metal roof. The price of this insulation can unfortunately be expensive. If you only have a thin budget available, this method may not be suitable. Styrofoam panel material is the most affordable. But these materials often cause many other problems. Starting from inviting insects and rodents to having to be replaced more often because they wear out quickly.
Installing Roof Tiles with Bearings
Another way that can be used to muffle the noisy sand metal tile is to use a bearing directly under the tile. These bearings are attached to the bottom of the tile nails. Using a rubber pad 2 to 3 millimeters thick is enough to help. The sand metal tile tint produced by the tile will be partially absorbed by the rubber. The muffled vibrations make the sound less noisy. The use of rubber also does not have to be wide, just 2 x 2 cm squares at each nail location. This method is cheaper than installing insulation. But the muted sound is also less. If it's raining heavily, usually these pads won't have much effect. Even so, this method is better than not making any modifications. The sound of metal tiles without bearings is definitely louder.
Use Leak-Proof Thick Paint Under the Tile
Tips for installing sand metal tiles so that they don't make noise next are to coat the bottom of the tile with thick, leak-proof paint. This paint makes a nice muffled tinkling tile sound. Leak-proof thick paint also helps the tile to be more solid to avoid leaks. This technique is the one most often used to make sure the house doesn't leak plus it doesn't make noise. The cost is not expensive, but the process is quite troublesome. The paint must be applied one by one and wait for it to dry first. This process makes the tile installation even longer. Installing a sandy metal tile with the above technique can reduce the sound produced. But remember that the sound will still be heard. The weakness of metal tiles is that the sound is louder when there is rain or strong winds. So know these risks before installing a metal tile.
Hopefully the tips above are enough to help reduce the noise of metal sand tiles when it rains. Thank you for reading this article!
Bahasa Indonesia 
Inggris
