Beranda > Artikel
Tips for Solving the Problem of Leaking Light Stee
During the rainy season, a leaking roof is an unpleasant problem for any family. A leaking roof can be caused by various factors, one of which is the homeowner's failure to properly maintain the roof. In this case, the roof tiles are the tiles. Lightweight steel tiles, often called metal tiles, are considered superior to other types of tiles. This type of tile is gaining popularity due to its advantages, including its lighter weight, lower price, and durability. But did you know? All types of tiles that are not properly maintained are prone to leaks. So, if you notice a leak in your tiles, you need to repair it immediately before the leak gets worse. For those of you who are trying to repair metal tiles yourself for the first time, consider the tips below:
Find the cause and source of the leak first
In the case of leaking tiles, leaks can be caused by various factors, including:
- The joints between the tiles are blocked by leaves or tree branches, allowing rainwater to enter the house
- Metal tiles can form depressions when stepped on. - --- This depression will change the path of water, allowing it to enter the house.
- Damaged roof tiles due to tears or holes.
- The slope of your roof is not up to standard. This prevents rainwater from flowing directly down.
- No cementing has been applied at the junction between the roof tiles and the wall, or cracks have formed at the junction. As a result, rainwater will seep into the house.
- Improper installation of roof tiles, such as tilted or crooked tiles.
- Check the source of the leak, which means tracing the water droplets to the roof tiles.
Once the source of the leak is identified, immediately repair it as follows:
Leaks at the Ridge
Replace and straighten the ridge or check the SDS (Self-Driving Screw) nails on the roof. Sealant (silicone water shield) can be used on the SDS nails if necessary.
Gutter Leaks
Check the severity of the leak in the gutter. If the leak is small, it can be patched using an additive. However, if the leak is large, it's best to replace the gutter with a new one.
Roof Leaks
If the leak is coming from one of the roof tiles, inspect the leak more closely. Leaks can be caused by improperly and neatly arranged roof tiles. You can fix this by rearranging the roof tiles and nailing them securely and neatly. If the leak is coming from SDS nails installed in the roof tiles, sealant can be applied to the nails to prevent water from seeping in.
Wall Flashing Leaks
You need to further investigate whether the leak is occurring in the plaster covering the wall flashing or in the wall flashing sheets. If the leak is only in the plaster covering the wall flashing, you can apply waterproofing to the plaster. However, if the leak is actually in the wall flashing sheets, you can repair and replace them.
Monitor lightweight steel roof tile repairs
Monitoring should be carried out during rainy days to assess whether the repairs have successfully resolved the leak. If leaks persist, you need to conduct a repeat inspection more thoroughly and thoroughly.
You should only purchase high-quality lightweight steel roof tiles. The quality of the tiles you buy also affects their weather resistance. Make sure you purchase tiles and other building materials from a trusted and experienced store. Visit our website at www.materialbangunan.com and get quality metal roofing at the best prices.
Bahasa Indonesia 
Inggris
