Pilih Bahasa Anda   Bahasa IndonesiaBahasa Indonesia   EnglishInggris
 
Pencarian Produk
 
 
 
Harga mulai dari Sampai
 
 
Beranda > Artikel
6 How to Install a Roof from Spandex Material

Spandek roof is also known as galvanized roof or aluminum coated steel roof. This spandex roof is made of stainless steel with a corrugated surface. This roof is claimed to have a resistance of 4 times stronger than a galvanized steel roof of the same thickness. Basically, a spandex roof is made of 55% aluminum, 43% zinc, and 2% silicon. Apart from having high resistance to corrosion, spandex roofs are also flexible.

In general, spandex roof is applied to business buildings such as warehouses, factories, shop houses, malls, and others. The size on the market varies greatly with a thickness level of around 0.3-0.5 mm and a wide choice of colors. This roof can be applied with a gording distance of about 120 mm. Based on its durability, spandek roofs are considered one of the most durable types of roofs because they can last for more than 20 years.

The use of spandex roofs has many advantages, including:

- Has good resistance to corrosion

- Has anti-termite and other destructive properties

- The building design looks more modern and futuristic

- Needs a little because the expanse is wide

- Various colors and not easy to fade

- Stronger and sturdier profile structure

- Affects the function of the building

- The material is more effective and efficient

Here are the practical steps for installing a spandex roof for good and maximum results!

1. Pedestal Distance Measurement

Do the measurement job well in order to get precise and accurate results. You need to find out how much space is available and how much spandex roof to use. You also need to determine the width of the spandex roof that is suitable for use. After all this data has been collected, then take measurements of the pedestal distance that will be required by the spandex roof.

2. Making Easel Designs

To install a spandex roof, you can use lightweight steel trusses or galvalume. In doing so, you need to pay attention to factors such as the ability of the horses to withstand loads, the level of roof slope, and the determination of the length of the top chord. Do the calculation of the design of this spandek roof truss correctly. Mistakes that occur in the planning of the horses will make the spandex roof prone to collapse.

3. Easel installation

After the design of the truss has been made, now is the time to implement the design into its real form. But first you need to put on protective clothing for safety first. It is highly recommended to wear pants and shirts with long sleeves, gloves, and protective glasses. Then you can start installing the truss to support the spandex roof.

4. Installation of Steel Battens

If the truss has been completed with a stretch that is confirmed to be sturdy, the next step is to install steel battens. This batten will later become the support of the spandex when installed as a roof. Therefore, the installation of battens must be adjusted to the width of the spandex roof you are using. This batten distance can be adjusted according to the spandex width. Do the work of making this batten carefully and make sure the position is straight.

5. Spandek Roof Installation

Now is the time to install the spandex roof on the lightweight steel roof truss that has been completed. The installation process is more or less the same as for other types of metal roofing. Here you need a special screw equipped with a rubber head to prevent water seepage. This screw installation can be done using an electric drilling machine with a suitable drill bit to make it easier and faster to complete.

6. Checking Work Results

Don't forget to check the results of your work that has been completed. Evaluation of the results of the installation of this spandex roof is very important to ensure that everything is properly installed. If there are components that are not installed correctly, you should fix them quickly so that problems do not occur in the future. So that your work produces optimal results.


Artikel
 
 

Atrikel Terkait
Awas! Ini Penyebab Plafon Gypsum Rumah Bisa Roboh

Awas! Ini Penyebab Plafon Gypsum Rumah Bisa Roboh


 
 
 
TERHUBUNG DENGAN KAMI
 
facebook   twitter
 
 
Pertanyaan
 
 
TELEPON CS KAMI
(021) 5565-8080
 
 
 
 
 
ISO award
Home

Idea award
 
 
Hubungi Kami
PT. Timur Mas Abadi
Jl. Pajajaran no.55, Jatiuwung
Tangerang - Indonesia 15137
Telp. 021-5565 8080 Fax. 021-5565 8181
 
 
BCA
581 030 0860
a.n PT. Timur Mas Abadi
 
MANDIRI
101 000 4644 892
a.n PT. Timur Mas Abadi