Pilih Bahasa Anda   Bahasa IndonesiaBahasa Indonesia   EnglishInggris
 
Pencarian Produk
 
 
 
Harga mulai dari Sampai
 
 
Beranda > Artikel
Reduce Metal Heat Tile
Roofing in the form of metal plates such as spandek or zinc plates is a popular choice in our society. This metal tile has several advantages, namely: lightweight, practical because one sheet is able to cover a fairly large area, and is relatively easier and faster in working on its installation.

The weakness of this type of metal tile is noisy when it rains and also increases the temperature of the room below. Sometimes the temperature is quite felt for the residents, especially during the daytime and coincides with the dry season as well. There are several common methods used to reduce the heat of this metal roof tile house. How to reduce the heat of metal tile, including:

Aluminum Foil

The correct writing is aluminum not aluminum. It is wrong, but knowing now is far better than not knowing at all. This aluminum foil is different from the aluminum foil used for cooking! This aluminum foil is made specifically for metal tile coating and is widely sold in building material stores and building material supermarkets. Aluminum Foil for metal tile is made of 2 layers, namely a layer of heat insulation from aluminum and a reinforcement layer so it is more resistant to tearing. Between the two layers, an air cavity is made to increase the heat insulation power.

Advantages of Aluminum Foil:

- Insulator or heat sink is quite good, the temperature conditions of the house or building can be cooler.
- Strong and long enough to use.
- Flexible and easily adapted to the shape of the roof of a house or building.
- Easy to install on a roof frame because it is in the form of rolled sheets.
- Reducing dirt that comes in between the metal tile, so that the ceiling is more durable.
- Withstand leaks when it rains, so that the ceiling can be maintained durability.
- Being able to reduce heat entering the underside of the roof, the ceiling can be maintained, not easily fragile due to excessive expansion.
- Reduces the noise of rainwater that hits metal roofs.

EPS Sheet (Expanded Polystyrene)

The other coating is EPS sheet called Styrofoam. Styrofoam is a trademark of building insulation products. But it is mistakenly used to refer to styrofoam foam sheets for packaging or for crafts. The appearance is arguably similar but the way of making it is very different. This EPS insulation sheet has a material strength that is far stronger than that of the styrofoam packaging or craftsmanship sheet.

Advantages of EPS sheets:

- Good heat or cold insulation or silencer.
- Resistant to heat and rain if there is seepage due to tampias or cracks in metal tile.
- Its weight is light so it does not provide a large additional burden on the roof truss.
- The sheets are easy to cut so that they are practical in the process of installation.
- EPS sheets are able to withstand the flow of air entering the cracks of the metal tile.
- Being able to reduce heat and also withstand the incoming air flow, the temperature of the room under the roof tends to be more stable so that the air conditioner in the building can work effectively and function more efficiently.
- The service life is quite long, so it is quite efficient in terms of cost because there is no need to replace or repair roof and ceiling.
- Because it is resistant to heat and water, the ceiling can be more durable.

Polyurethane Foam

This is a polyurethane foam that is sprayed on an area that will be insulated from hot or cold. A mixture of certain chemical solutions is sprayed into one area, then the solution expands into a layer of foam that closes the gaps so that insulation can be optimized.

The advantages of polyurethane foam:

- Excellent heat and cold absorbers or absorbers making them suitable for use in cold and hot climates.
- Resistant to heat and rain, so the ceiling can be more durable.
- Easy to apply because it is simply sprayed on the area to be coated.
- The automatic coating work time will be shorter and the time span of the roof work will be faster.
- Being able to close the gap well so it is suitable to close the gap that usually exists between the tile with the building wall.
- Able to protect the area under the roof from rain water, dirt and insect pests and also mice. As a result, not only is the ceiling more durable, but the condition of the house is healthier.
- Able to dampen the sound quite well, so the building can be quieter both from the sound of rain water or noise pollution from outside.

Because of his advantages above, the level of energy efficiency in buildings or homes will increase. These are some of the commonly used ways to reduce heat from metal tile. Hopefully enough can answer your needs. Good luck!

Artikel
 
 

Atrikel Terkait
Atap Rumah Sering Bocor? Lakukan 5 Trik Ini

Atap Rumah Sering Bocor? Lakukan 5 Trik Ini

Tips Memilih Atap Rumah

Tips Memilih Atap Rumah

Genteng Beton atau Metal Ya?

Genteng Beton atau Metal Ya?

Pilih Mana: Atap Go Green atau Spandek?

Pilih Mana: Atap Go Green atau Spandek?

Keunggulan Atap Spandek Batuan

Keunggulan Atap Spandek Batuan

Masalah umum rumah di musim hujan

Masalah umum rumah di musim hujan


 
 
 
TERHUBUNG DENGAN KAMI
 
facebook   twitter
 
 
Pertanyaan
 
 
TELEPON CS KAMI
(021) 5565-8080
 
 
 
 
 
ISO award
Home

Idea award
 
 
Hubungi Kami
PT. Timur Mas Abadi
Jl. Pajajaran no.55, Jatiuwung
Tangerang - Indonesia 15137
Telp. 021-5565 8080 Fax. 021-5565 8181
 
 
BCA
581 030 0860
a.n PT. Timur Mas Abadi
 
MANDIRI
101 000 4644 892
a.n PT. Timur Mas Abadi