Pilih Bahasa Anda   Bahasa IndonesiaBahasa Indonesia   EnglishInggris
 
Pencarian Produk
 
 
 
Harga mulai dari Sampai
 
 
Beranda > Artikel
The Right Way to Overcome Roofing Problems

To anticipate various problems that generally arise during the rainy season, you need to check or repair at a certain number of points on the building, for example roof structures. The initial problem is usually because the tile is sagging or the roof is leaking can require you to make major repairs or even replace the entire roof structure. Before this happens, consider the various major problems that often occur in roof structures and ways to overcome them.

1. Ramps
The roof slope factor is an important point that must be considered so that falling water can be immediately flowed down. A flat or sloping roof will cause the water to fall slowly and gradually cause a puddle in the concrete and seeps. The right solution is to increase the slope of the roof.

2. Sloping Tile
Usually clay tiles are designed for angles between 27 to 40 degrees. If the angle is not right, it will become the water entrance. And the cracks are deliberately made to anticipate the expansion of each tile even as air ventilation. We recommend that each tile tile nailed to the battens that are right below it so it is not easy to sag.

3. Dak Concrete Cracked Hair
Cracked hair into a gap in the entry of water. Therefore, pay attention to the composition of the concrete mixture and the casting process because these two things are important processes that affect the final result of the concrete. Therefore, use waterproofing on the entire surface of the roof.

4. Leaky roof
Changes in the weather cause roof tiles break easily and cracked cement. Check once a year at the meeting form of the roof, each ridge and gutter and coated with waterproofing.

5. Cracked Ridge
The size of the cam or journal that is too high will cause a gap for the water. Minimize roof connections and apply special sheets that are soft and flexible against the ridge surface.

6. Attic Heat
The temperature of the panad can be reduced by making crossed ventilation by modifying the vent and making a cavity under the tile. Apart from that, it can also use turbine insulation and installation materials.


Artikel
 
 

Atrikel Terkait
27
MAR
Mengenal Ragam Aksesoris Atap

Mengenal Ragam Aksesoris Atap

20
MAR
Pilihan Bahan Bangunan untuk Atap Rumah

Pilihan Bahan Bangunan untuk Atap Rumah

20
MAR
Pilihan Bahan Bangunan untuk Atap Rumah

Pilihan Bahan Bangunan untuk Atap Rumah

Kelebihan Atap Limas (Perisai) dan Cara Menghitung

Kelebihan Atap Limas (Perisai) dan Cara Menghitung Luasnya

Cara Sederhana Menghitung Luasan Atap Bangunan

Cara Sederhana Menghitung Luasan Atap Bangunan

Beberapa Fungsi Atap Baja Ringan untuk Rangka Suat

Beberapa Fungsi Atap Baja Ringan untuk Rangka Suatu Bangunan


 
 
 
TERHUBUNG DENGAN KAMI
 
facebook   twitter   instagram   youtube
 
 
Pertanyaan
 
 
TELEPON CS KAMI
(021) 5565-8080
 
 
 
 
 
ISO award
Home

Idea award
 
 
Hubungi Kami
PT. Timur Mas Abadi
Jl. Pajajaran no.55, Jatiuwung
Tangerang - Indonesia 15137
Telp. 021-5565 8080 Fax. 021-5565 8181
 
 
BCA
754 033 3887
a.n PT. Timur Mas Abadi
 
MANDIRI
155 006 7878 788
a.n PT. Timur Mas Abadi