The roof of the house is one important component of the house and even very important. If the components of this house are damaged, it will definitely be unsettling for residents of the house. Because in the rainy season your house will leak. Actually what are the problems on the roof of the house? And what is the solution? Well, here are some problems with the roof of the house and the solution:

1. The roof is too gentle
The roof slope factor must be considered, so that falling water can flow immediately. A sloping roof causes water to slow down and will gradually gather in concrete and seep.

How to fix it, the roof design must follow the ideal slope requirements of 30-40 degrees. The size of this slope is the ideal limit for the roof truss so that it can hold the roof cover well so that water can be immediately poured out on the ground. Conversely, a steep roof can make tile sag.

2. Leaky roof
The roof needs to be inspected and maintained at least once a year. Pay attention to each ridge, meeting the shape of the roof, and the gutter. Changes in weather, especially extreme weather can make roof tiles break easily and cement on the ridge cracks. To that end, cover the tile, ridge and gutter connections with waterproofing.

3. Porous Roof Frame
The cause of porous roof frames vary, for example seepage of water that drips from between the roof tiles and gutters. Replacing the entire roof truss must be done if the damage is severe, for example the horses or most porous rafters. However, if the damage is only a small part of rafters and battens, you can repair only the damaged parts.

4. Slumped tile
Generally clay tiles are designed for angles of 27.5-40 degrees. If the installation angle is not right, will be the water inlet. Meanwhile, tile cracks are made to anticipate the expansion of tile pieces, as well as air ventilation.

Preferably, the angle of the roof is made sloping with an angle wider than 40 degrees. Each tile should also be nailed to the battens that are directly underneath so that they do not sag easily.

5. Cracked Ridge
Cracked ridges occur due to weather changes. The fix, minimize the roof connection such as the use of ridges and jurai. The size of the ridge or jurai should not be too high because it will cause a gap that invites water. Alternatively, apply a special sheet that is waterproof, soft, and flexible on the cam surface.

6. Hair cracks on the concrete deck
Changes in heat and cold continuously will not make concrete cracks smooth. However, even the slightest crack will make the water enter. These problems can be overcome by paying attention to the composition of the concrete mixture and the casting process, because these two things determine the quality of concrete. If cracks have occurred, use waterproofing on the entire surface of the roof.

7. Heat in the Attic
The heat in the attic can be reduced by cross ventilation. You can modify the vent and create a cavity under the tile.